Using KOSMOS
24 KOSMOS User Guide
• 1:2—Tap this option to adjust the screen split so the M-Mode area is
twice as big as B-mode.
• 1:1
—Tap this option to adjust the screen split so that the M-Mode and B-
mode areas are equal.
7. From the Thermal index display area, select from the following:
• TIS
—Thermal index for soft tissue
• TIB
—Thermal index with bone near the focus
Configuring ECG and DA signals
Ultrasound is always configured with DA, ECG or DA and ECG.
To configure the horizontal screen split between the ultrasound, ECG, and DA
signals:
1. From the Home screen, tap SETTINGS.
2. Tap ECG & DA Signals.
3. Tap the layout that best suit your needs.
Setting the language, date, and time
Turning on the automatic date and time will not automatically select time zone.
You have to manually adjust the time zone.
To set the language, date, and time for KOSMOS:
1. From the Home screen, tap SETTINGS.
2. Tap Language, Date, and Time.
3. From the Language list, tap the language of your choice.
4. From the Date list, tap the format of your choice.
5. If you would like the time to display in 24-hour format, tap to the right of the
Use 24-hour format button to turn it on.
6. To turn off the automatic date and time (provided by your network), tap to
the left of the Automatic date and time button to turn it off.
To Next Page
Loading...
