Performing an Exam
54 KOSMOS User Guide
1. Tap the More options icon next to the color map on the right side of the
screen.
2. Select the color map you like.
3. To invert the color map, select the check box, and tap OK to save the
changes.
Image mode controls
Flipping an image
You can only flip an image when you are scanning the heart.
To flip the image, double-tap the orientation marker.
Adjusting body mass index (BMI)
In KOSMOS, BMI is used to adjust the penetration level. BMI is not calculated or
supplied from the patient's height or weight entry.
There are three levels of adjustment:
• Low (default)
• Medium
• High
When you adjust the BMI, it changes the penetration signal for the ultrasound
parameters, so if you have a patient with a high BMI, you will want to increase
the BMI (and vice versa).
To adjust BMI, tap BMI, and select one of the three different penetration
levels.
Adjusting depth and gain
To adjust depth:
• To increase the displayed depth, turn the Depth knob clockwise.
• To decrease the displayed depth, turn the Depth knob counter-clockwise.
To Next Page
Loading...
