Using KOSMOS
28 KOSMOS User Guide
• PING to test the network connection between KOSMOS and the PACS
archive
• Verify to check the availability of the active PACS archive.
Kosmos Bridge displays the results on-screen.
6. In the Profile nickname box, type a unique name to display in the PACS
profile list.
7. In the Archival options area, you have two options:
• Prompt options every time - Switched on by default; each time you tap
the Archive button from the Exam review screen, a pop-up menu with
different options displays. If you turn the switch off, KOSMOS does not
display the pop-up menu.
• Attach report
—Switched off by default. If you turn it on, KOSMOS
attaches a report to the archive.
8. In the Auto archive area, select from the following options:
• On/Off
—The auto archive is switched off by default. This means that all
the controls (except the on/off switch) are disabled and cannot be edited.
If you turn the switch on, all the controls are enabled and can be edited.
• Archival frequency
• Completion of exam
—The archival time selector is disabled.
• Daily
—Only the time section of the archival time selector is enabled.
• Weekly
—The complete archival time selector is enabled.
• Archival time
—Select a daily time and day to archive exams.
9. In the SCU timeout (in seconds) area, select 10, 15, or 30.
10. In the SCP timeout (in seconds) area, select 10, 15, or 30.
11. In the Retry interval (in seconds) area, select 60, 300, or 600.
12. To have the system automatically retry failed jobs, keep the switch set to On;
otherwise, slide it to Off.
Deactivating a profile
To activate or deactivate a profile, in the PACS archive list, tap the switch to
toggle between Active and Inactive.
To Next Page
Loading...
