echosens FibroScan 502 touch - Examination Type Selection Area

E300M017.4
FIBROSCAN 502 TOUCH USER MANUAL GiT
Calibrate the probe.
N
Electromagnetic disturbances.
ZÁ
Overheating.
6.6.13. Examination type selection area
The examination type selection criteria according to patient morphology are described in the
section on 'Criteria for selecting the probe and the type of examination’.
If the S* probe is connected, select examination type S1 or S2.
If only the M* or XL* probe is connected, the corresponding examination type is selected
automatically by the device software.
If several probes are connected, choose the examination type.
Automatic probe recommendation
The automatic probe recommendation tool is based on the Skin-to-Capsule Distance
— (SCD) measurement using ultrasound signals received by the device's probe. This feature
operates in real time as soon as the probe detects ultrasound signals (probe in contact with
patient's skin).
ER This tool functions for the M* and XL* probes only.
03/2017 - ECHOSENSTM AND FIBROSCAN® ARE TRADEMARKS © COPYRIGHT ECHOSENS - ALL RIGHTS RESERVED 41