echosens FibroScan 502 touch - Printer Tab; Data Tab

FibroScan
FIBROSCAN 502 TOUCH USER MANUAL EFATE)
Logo
Press [Modify]. If an image filed called logo.bmp is present in the root of the USB device
connected to the device, the logo is automatically modified. The logo appears on the
examination report.
[Reset] deletes the logo from the examination report.
9.4. PRINTER TAB
This tab lets you configure examination report printing.
For an Operator
Auto-print count
Enter a digit corresponding to the number of reports to print at the end of each examination.
The digit 0 is input by default.
For a FibroScan Administrator
Printing format
A4 or Letter
The Letter format matches the American paper format.
Printers
[Update] Update the list of printers.
Lets you add a printer. You can add by port, by IP address or
{Add printer] by selecting a shared printer.
[Set as default] Lets you define a printer as default printer.
[Delete printer] Lets you delete a printer. Follow the on-screen instructions.
[Search for printer
patch]
Lets
you add
a
printer
patch
supplied
by
Echosens.
{Stop any printing in
progress] Lets you cancel current printing operations.
9.5. DATA TAB
This tab is used to import, export and archive examination files. It can only be accessed by
users with FibroScan administrator rights.
0 A removable USB storage device must be connected.
E300M017.4
03/2017 - ECHOSENSTM AND FIBROSCAN® ARE TRADEMARKS © COPYRIGHT ECHOSENS - ALL RIGHTS RESERVED 53