Eclipse CD5444 - Page 105

105
How to operate the Sound Adjustment Mode
Press the [SEL] button for more than one second.
The mode will return to equalizer setting mode.
Press the [RTN] button.
At this time, other adjustments can also be made in
advance mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
8
7
6
Press the [6] button for less than one second to select
the Q curve pattern.
Each time the button is pressed, the Q curve changes in
the following order.
5
Q1 (SLOW) Q2 (NORMAL) Q3 (SHARP)
[SEL] button[RTN] button
[SOUND] buttonButton [6]