Page 6 ecom-EN3
Content
Information on the instrument 3
1. Instrument Design 8
1.1 ecom-EN3/-R, Transport variant aluminium-framed transport case 8
1.2 ecom-EN3-F, Transport variant professional case 9
1.3 ecom-EN3, Keyboard controls 10
1.4 ecom-EN3, Connections at the instrument 11
1.5 ecom-EN3, Option heated probe for soot measurement 12
1.6 ecom-EN3, Option hand soot pump set 13
1.7 Gas Cooler (Option) 14
1.8 Data Memory 15
1.9 ecom-EN3, Option Interfac Wi-Fi (WLAN) 16
1.10 ecom-EN3, Option interface BLE (Bluetooth Low Energy) 16
2. Measurement Preparations 17
2.1 Turn on the instrument and check the battery 17
2.2 Navigation in the menu 18
2.3 Calibration of the sensors, use of the database and fuel type selection 19
3. Carry out gas analysis 21
4. Measurement procedure gas analysis 22
4.1 Gas analysis 22
4.1.1 Adaptation of the displays for gas analysis 23
4.1.2 Positioning the probe, search the core stream 23
4.1.3 Printing measured values 24
4.1.4 CO-Overload Protcektion 25
4.2 Measurement procedure gas analysis: CO measurement 26
4.3 Measurement procedure gas analysis: O2 Check 27
4.4 Measurement procedure gas analysis: Draught measurement 27
4.5 Measurement procedure gas analysis: Flow measurement pitot tube (option) 28
4.6 Measurement procedure gas analysis: Soot...Oil trace 28
4.6.1 Soot measurement 29
4.6.2 Oil trace 29
4.7 Measurement procedure gas analysis: Data processing 30
4.7.1 Create new 30
4.7.2 Memory number 31
4.7.3 Search word 32
5. Measurement procedure mean values 33
6. Measurement procedure Diagnostics 35
6.1 Fault diagnostic 35
6.2 delta-T Measurement 37
6.3 Heating Check (option) 38
6.4 4 Pa Measurement (option) 41
6.5 Pressure Tests (option) 42
6.5.1 Pressure Test 43
6.5.2 Loading Test 44
6.5.3 Tightness Test 45
6.5.4 Usage property 46
To Next Page
Loading...
Need help?
General
