The data, information and descriptions, and the technology described herein are the exclusive intellectual property of Snap-on Climate Solutions S.r.l. and
constitute industrial secrets. Said information is communicated in strict confidentiality; said information may be used only for the purpose for which it is
communicated; said information may not be divulged, communicated, or revealed to third parties and/or reproduced by any means for any reason whatsoever; said
information is protected under applicable Italian competition and industrial property law.
Service manual Cinquecento12 (VA21) [MANUY2V.SB0] ed.1 ver.0.1.doc pag.33 - 09/11/2021
QUICKSETUP
The first time the machine is used, a quicksetup guide appears: the operator is guided through
the steps described at the start of the PRELIMINARY OPERATIONS section. The quicksetup
can also be found in the SETUP MENU, select QUICKSETUP. The following screen is
displayed:
Press ENTER to proceed with QUICKSETUP, the user will be guided through the following
steps:
Language
Measure units
License plate recording
Date and time
Setup header print
Vacuum settings
Tank filling
Follow the instructions displayed. At the end of the procedure, press ENTER to print a
summary report of the guided procedure. Press ESC to exit.
NOTE: If the guided procedure is not completed, it will be displayed again the next time the
machine is switched on.
NOTE: To display the QUICKSETUP at any time, select from the menu of the same name
under SETUP.
QUICKSETUP
Press ENTER to continue
Press ESC to exit
To Next Page
Loading...
