Ecotechnics Cinquecento12 - Options

The data, information and descriptions, and the technology described herein are the exclusive intellectual property of Snap-on Climate Solutions S.r.l. and
constitute industrial secrets. Said information is communicated in strict confidentiality; said information may be used only for the purpose for which it is
communicated; said information may not be divulged, communicated, or revealed to third parties and/or reproduced by any means for any reason whatsoever; said
information is protected under applicable Italian competition and industrial property law.
Service manual Cinquecento12 (VA21) [MANUY2V.SB0] ed.1 ver.0.1.doc pag.37 - 09/11/2021
OPTIONS
Select OPTIONS, insert the OPTION code:43210791 the following screen will be displayed:
Enable printer (if installed) press ENABLE PRINTER, the following screen will be displayed:
Choose ON to enable the printer and OFF to disable it then press ENTER.
By pressing the button you can run a test print
Enable hybrid kit (optional) press HYBRID KIT, the following screen will be displayed:
Choose ON to enable the hybrid kit and OFF to disable it then press ENTER.
DD/MM/YY XX:XX PM
ENTER
ON
OFF
ENABLE HYBRID KIT
ENABLE PRINTER
HYBRID KIT
ESC
DD/MM/YY XX:XX PM
DD/MM/YY XX:XX PM
ENTER
ON
OFF
ENABLE PRINTER
PRINTER TEST
PRINTER TEST