Ecotechnics SUN ECK TWIN 12 - Page 34

INSTRUCTIONS MANUAL
-35-
Disconnect LP coupling from A/C system, then press ENTER to continue:
The machine will recover the residual refrigerant into the service hoses, then the following
screen will be displayed:
You are asked to enter the vehicle's PLATE, the FRAME NUMBER, the KM/Miles and the
Operator Code. Press ENTER.
A summary of the amount of gas recovered, oil recovered, minutes of the vacuum phase and
the amount of gas charged is displayed. Press the symbol
for printing (Optional)
Automatic procedure completed successfully, press ENTER to return to the main page.
NOTE: The automatic procedure may be run even if the A/C system is empty. In this case the
machine will begin with the vacuum phase.
EMPTY HOSES
Hoses pressure 4.0bar
STOP
DD/MM/YY XX:XX PM
EMPTY HOSES
ENTER
DD/MM/YY XX:XX PM
Disconnect LP coupling from A/C system end press ENTER
ENTER
DD/MM/YY XX:XX PM
-
-
-
123456
Plate:
VIN:
Miles:
Operator code:
END of procedure
Gas recovered: 41 g
Oil recovered: 0 ml
Vacuum time: 2 min
Oil injected: xx ml
UV injected: xx ml
Gas charged: 200 g
Press ENTER to continue
DD/MM/YY XX:XX PM
ENTER
CHARGE AMOUNT
ENTER
DATABASE