H100N Pulse Oximeter User Manual Safety Information
- 13 -
CAUTION
4 The sensor unconnected icon and associated
alarm indicate the sensor has disconnected or wire
fault. So check the sensor connection and, if
necessary, replace the sensor, extension cables or
both.
5 When adjusting any menu parameters, the
oximeter does not display SpO2, PR or TEMP, but it
is still recording.
6 The performance of the oximeter may be
degraded if the following occur:
— Operation or storage temperature and
humidity outside the manufacturer’s stated
range;
— Mechanical shock (for example, it drops
from the table).
— Patient temperature is below ambient
temperature (For measurement body
temperature).
To Next Page
Loading...
