H100N Pulse Oximeter User Manual Oximeter Operation
- 44 -
Waveform Mode
In the normal measurement state, oximeter can measure
arterial oxygen saturation and pulse rate, display oxygen
saturation level and symbol（%SpO
2
）and PR on interface.
Besides, it can also display pulse bar graph and
Plethysmogram.
In waveform mode, oximeter displays SpO
2
and PR
information, and the TEMP value is not displayed on the
screen.
Figure 3-3 Waveform Mode
3.2.2 Trend Graph
In normal measurement state, press the Up Arrow button
to display SpO
2
trend graph; press the Down Arrow
button to display 10-minute PR trend graph as follows:
To Next Page
Loading...
