EDAN H100N - Page 53

H100N Pulse Oximeter User Manual Oximeter Operation
- 45 -
Figure 3-4 Display SpO2 and PR Trend Graph
3.2.3 Abnormal Measurement State
If the SpO
2
sensor does not connect to the oximeter, it
will give a medium alarm, and display
in the
Information area.
If the SpO
2
sensor falls off from the finger, it will give a
medium alarm, and display
in the information
area.
If the Temp sensor is abnormal, it will give a low alarm,
and display --- in TEMP parameter area.