H100N Pulse Oximeter User Manual Alarm
- 76 -
The low battery icon displays on LCD, and
gives a medium alarm. (Make sure Alarm System in
menu is set to ON.)
4.2.6 Higher than Hi Alarm Limit
If the measured value is higher than the Hi Alarm
(upper alarm limit), the oximeter gives a high alarm for
SpO
2
or PR, and gives a medium alarm for TEMP.
Here we take PR for example:
When the measured PR value is higher than the set PR
Hi Alarm, the oximeter gives a high alarm (Make sure
Alarm System in menu is set to ON). A ↑ icon displays
near PR, which indicates that the measured value is
higher than that of PR Hi Alarm, it will synchronously
flash with PR value.
4.2.7 Lower than Lo Alarm limit
If the measured value is lower than the Lo Alarm (lower
To Next Page
Loading...
