EDAN H100N - 6 Maintenance

H100N Pulse Oximeter User Manual Alarm
- 77 -
alarm limit), the oximeter gives a high alarm for SpO
2
,
PR, and gives a medium alarm for TEMP.
Here we take SpO
2
for example:
When the measured SpO
2
value is lower than the set
SpO
2
Lo Alarm, the oximeter gives a low SpO
2
alarm.
(Make sure Alarm System in menu is set to ON.)
A ↓ icon displays near SpO
2
, which indicates the
measured value is lower than that of SpO
2
Lo Alarm, it
will synchronously flash with SpO
2
value.
Likewise, when measured SpO
2
is lower than SpO
2
Lo
Alarm, or measured Temp is lower than Temp Lo
Alarm, it will also give an alarm.
4.2.8 Alarm Silence
If Alarm System in menu is set to ON, pressing the
Alarm Silence button, the audio alarm will be off for the
pause period set by the user, but the visual alarm is still
active.