EDAN SE-300 Series - About the System Setup Screen

SE-3&SE-300 Series Electrocardiograph User Manual About the Application Interface
- 19 -
H
Battery Symbol
Identify the current capacity of the battery
I
Waveform zone
Show waveform
J
Hint
Information
Including No Paper, Paper Error, Sampling, Analyzing,
Recording, Transmitting, Memory Full, U Disk, USB Printer,
Lead Off, Scanner, Reader. For details, please refer to Chapter 10
"Hint Information".
K
Lead Name
Including DEMO, Module Error, Overload, Lead Name (When the
leads are off, the lead names will be highlighted. For details, please
refer to Chapter 10 "Hint Information".
L
25mm/s
Speed
M
10mm/mV
Sensitivity
N
100Hz
Filter
NOTE: The speed, sensitivity or filter value modified in the main screen is only valid for
the current exam.
3.2 About the System Setup Screen
Figure 3-2 System Setup Screen
Press MENU on the main screen to display the System Setup screen.
On the System Setup screen, move the cursor on an item, and then press MENU to open the
setup window of the item. And press Return or RECALL to exit the System Setup screen.