EDAN SE-300 Series - 8.4 Patient Information Setup Options

SE-3&SE-300 Series Electrocardiograph User Manual Settings
- 53 -
8.4 Patient Information Setup
Item
Description
First/Last Name
Choose from: On or Off, the default value is Off
When it is set to On, patient name will be divided into first name and last
name.
ID
Choose from: Auto, Time or Manual, the default value is Auto
Select Manual, the patient ID which is within 30 ASCII characters needs
to be input manually.
Select Auto, ID accumulates from 0. The patient ID is 0~1999, 999, 999.
Select Time, when you press the PRINT/STOP key to print an ECG
report, the patient ID can be automatically generated according to the
time. Entering the patient ID manually is not supported.
ID Hint
Choose from: On or Off, the default value is Off
In the auto, rhythm mode, when ID is set to Manual and ID Hint is set to
On, if you do not input the patient ID before pressing the PRINT/STOP
key, a hint will pop up to remind you to input the patient ID.
Age
Choose from: Age, D.O.B or Age Group, the default value is Age
Select Age, you can enter the patient age manually in the Patient
Information window.
Select D.O.B, the D.O.B textbox appears and the Age textbox becomes
unavailable in the Patient Information window, you can enter the
birthday of the patient, and the system will calculate the patient age
automatically.