SE-3&SE-300 Series Electrocardiograph User Manual Managing ECG Records
- 43 -
electrocardiograph. If it is true, you should remove these records from the U disk, or
delete these records in the electrocardiograph, and then continue to import records to the
electrocardiograph.
After records are imported, the electrocardiograph will give a hint.
5. If you want to export only one record, choose the patient record in the table, press the MENU
key to enter the File Manager screen (b). Select the Export button and then press the MENU
key to confirm the operation.
6. Press the RECALL key to return to the Main Screen.
NOTE:
1. The transmission process is long, and please be patient to wait.
2. During the transmission, the U disk should not be pulled out.
3. Only the U disk with FAT format can be used.
7.3 Deleting Patient Records
1. Press the RECALL key to open the File Manager screen (a).
2. If you want to delete all the records, select the DEL ALL button, and then press the MENU
key.
3. If you want to delete a record, choose the patient record in the table, and then select Delete
button.
4. Press the RECALL key to return to the Main Screen.
7.4 Printing a Patient Record in the File Manager
screen
1. Press the RECALL key to open the File Manager screen (a).
2. If you want to print the patient record, choose the patient record in the table, and then press
PRINT/STOP key.
NOTE: If you use USB printer to print the patient record, when the PRINT/STOP key is
pressed, the electrocardiograph begins to analyze data. Then the USB printer
begins to print the ECG record after 8 seconds.
3. Press the RECALL key to return to the Main Screen.
To Next Page
Loading...
