SE-3&SE-300 Series Electrocardiograph User Manual Settings
- 50 -
10/5mm/mV, the default value is 10mm/mV
10/5mm/mV means that the gain of limb leads is set to 10mm/mV, while
the gain of chest leads is set to 5mm/mV.
AGC means auto gain control.
Choose from: On or Off, the default value is Off
Select On, the gain can be automatically adjusted according to actual
signals.
Choose from: Horizontal, Auto or Off, the default value is Horizontal
Select Horizontal, the baselines of the lead groups are adjusted
simultaneously, and the baselines of the leads in the same row are on the
same line.
Select Auto, the baselines of the lead groups are adjusted respectively.
Select Off, the baselines of the lead groups are adjusted equally in the
ECG reports.
Paper Marker is used to identify the start point of each page of the
recorder paper.
Choose from: Yes or No, the default value is No
Select Yes if the paper with black markers on the bottom is used, and the
device can identify the start point of each page of the recorder paper while
printing ECG reports.
8.3.2 Setup 2
To Next Page
Loading...
