EDAN SE-300 Series - A1.2 Environment Specifications; A1.3 Physical Specifications; A1.4 Power Supply Specifications

SE-3&SE-300 Series Electrocardiograph User Manual Technical Specifications
- 75 -
A1.2 Environment Specifications
Transport & Storage
Working
Temperature:
-20ºC (-4ºF) ~ +55ºC (+131ºF)
+5ºC (+41ºF) ~ +40ºC (+104ºF)
Relative Humidity:
25%RH~93%RH
Non-Condensing
25%RH~80%RH
Non-Condensing
Atmospheric Pressure:
70 kPa ~106 kPa
86 kPa ~106 kPa
A1.3 Physical Specifications
Dimensions
SE-3: 290mm×220mm×85mm, ±2mm
SE-300 series: 300mm ×260mm×85mm, ±2mm
Weight
Approx. 2.0 kg (4.4 lbs)
(Excluding recorder paper and battery)
Display
3.5", 320×240 LCD Screen (black and white screen is for configuration A,
color screen is for configuration B)
A1.4 Power Supply Specifications
Mains Supply:
Operating voltage =100V-115V~ / 220V-240V~
Operating frequency = 50Hz / 60Hz
input power = 35VA
Built-in Lithium Battery Pack:
Rated voltage = 14.8V
Rated capacity = 2500mAh
When the battery is fully charged, the 3-channel
electrocardiograph can work normally about 6.5 hours. It
can continuously record about 3 hours in Manual mode, and
record 330 reports at most in the AUTO mode.
Necessary Charge time: 5 hours
Cycle life ≥ 300 times
Fuse:
T400mAH250V, Ø5×20mm