SE-3&SE-300 Series Electrocardiograph User Manual Switching On the Electrocardiograph
- 32 -
Chapter 5 Switching On the Electrocardiograph
♦ When the mains supply is used, connect the power cord, press the mains switch on the left
side of the unit, and then the mains supply indicator lamp ( ) is lit. Then press the
ON/OFF key on the control panel to turn on the unit. Then SE-3/SE-300 series is ready
for use.
♦ When a built-in rechargeable lithium battery is used, press the ON/OFF key on the
control panel directly to turn on the unit, and then the battery indicator ( ) is lit. The
equipment information such as the device name, the version number will be displayed on
the LCD screen after self-test. Then SE-3/SE-300 series is ready for use.
To Next Page
Loading...
