SE-3&SE-300 Series Electrocardiograph User Manual Managing ECG Records
- 42 -
7.2 Copying ECG Records between the ECG Machine
and U Disk
1. Connect the U disk to the electrocardiograph.
2. Press the RECALL key to open the File Manager screen (a).
3. Select the TransAll button, and then press the MENU key to confirm the operation. And
then the ECGDATA folder of all the records will be transmitted to the U disk automatically.
During the transmission, if something wrong happens, the electrocardiograph will give the
error information. Then you should check whether the U disk is connected to the
electrocardiograph well.
4. If you want to import records from the ECGDATA folder of the U disk to the
electrocardiograph, select the Import button, and then press the MENU key. The
extended-name of imported records should be “.dat”.
NOTE: To import records from the U disk to the electrocardiograph, there should be
some records in the folder named ECGDATA in the U disk. The folder name
ECGDATA must be capital letters. You should not change the name of records in
the ECGDATA folder.
During the transmission from the U disk to the electrocardiograph, if something wrong
happens, the electrocardiograph will give the error information. Then you should do the
following operations:
1) Firstly, check whether the U disk is connected well.
2) If the error information is still displayed, you should check whether there is the
ECGDATA folder including some records with the extended-name of “.dat” in the U
disk. If not, you should create an ECGDATA folder in the U disk and add records to be
imported to the U disk.
3) If the error information is still displayed, you should check whether the total number of
records in the ECGDATA folder of the U disk and the File Manager of the
electrocardiograph exceeds the limit. The limit of the electrocardiograph is 500. If the
total number exceeds the limit, you should remove some records from the ECGDATA
folder of the U disk, and then continue to import the remainder records to the
electrocardiograph.
4) If the error information The same record found! Press PRINT/STOP return is displayed,
you should check whether there are cognominal records in the U disk and the
To Next Page
Loading...
