Chapter 8
| Authentication Commands
Web Server
– 268 –
Interface :
Console#
Web Server
This section describes commands used to configure web browser management
access to the switch.
ip http authentication This command specifies the method list for EXEC authorization for starting an EXEC
session used by the web browser interface. Use the no form to use the default port.
Syntax
ip http authentication aaa exec-authorization {default | list-name}
no ip http authentication aaa exec-authorization
default - Specifies the default method list used for authorization requests.
list-name - Specifies a method list created with the aaa authorization exec
command.
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#ip http authentication aaa exec-authorization default
Console(config)#
Table 43: Web Server Commands
Command Function Mode
ip http authentication Sets the method list for EXEC authorization of an EXEC
session
GC
ip http port Specifies the port to be used by the web browser interface GC
ip http secure-port Specifies the TCP port number for HTTPS GC
ip http secure-server Enables HTTPS (HTTP/SSL) for encrypted communications GC
ip http server Allows the switch to be monitored or configured from a
browser
GC
To Next Page
Loading...
Need help?
General