Edge-Core ECS4620-28F - Page 699

Chapter 24 | Multicast Filtering Commands
IGMP Filtering and Throttling
– 699 –
show ip igmp filter This command displays the global and interface settings for IGMP filtering.
Syntax
show ip igmp filter [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ip igmp filter
IGMP Filter enabled
Console#show ip igmp filter interface ethernet 1/1
Ethernet 1/1 information
---------------------------------
IGMP Profile 19
Deny
Range 239.1.1.1 239.1.1.1
Range 239.2.3.1 239.2.3.100
Console#
show ip igmp profile This command displays IGMP filtering profiles created on the switch.
Syntax
show ip igmp profile [profile-number]
profile-number - An existing IGMP filter profile number.
(Range: 1-4294967295)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ip igmp profile
IGMP Profile 19
IGMP Profile 50