How to Use This Guide
ā 6 ā
December 2014 Revision
This is the fourth version of this guide. This guide is valid for software release
v1.2.2.0. It contains the following changes:
ā Added information for ECS4620-28F-DC.
July 2014 Revision
This is the third version of this guide. This guide is valid for software release v1.2.2.0.
It contains the following changes:
ā Added information for ECS4620-28T-DC.
ā Updated usage information for the command "mac-learning" on page 312.
ā Updated syntax and usage information for the command "ip source-guard
binding" on page 362.
ā Updated usage information for the command "ip source-guard mode" on
page 366.
ā Added the command "loopback-detection action" on page 502.
April 2014 Revision
This is the second version of this guide. This guide is valid for software release
v1.2.1.3. It contains the following changes:
ā Added information for ECS4620-28F, ECS4620-28T, and ECS4620-28P.
ā Extended configurable VLAN range from 1-4093 to 1-4094.
ā Added "Stack Operations" on page 69.
ā Added the command "show process cpu task" on page 130.
ā Added "Stacking" on page 198.
ā Updated syntax for "snmp-server enable traps" on page 208.
ā Added the commands "snmp-server enable port-traps mac-notification" on
page 212 and "show snmp-server enable port-traps" on page 212.
ā Updated command usage section for the command "pppoe
intermediate-agent port-format-type" on page 305.
ā Added the command "pppoe intermediate-agent port-format-type remote-id-
delimiter" on page 306.
ā Added the command "mac-learning" on page 312.
To Next Page
Loading...
