How to Use This Guide
ā 8 ā
ā Updated syntax for the commands "show qos map cos-dscp" on page 641,
"show qos map dscp-mutation" on page 641, and "show qos map phb-queue"
on page 642.
ā Added the commands "clear ip igmp snooping groups dynamic" on page 683,
and "clear ip igmp snooping statistics" on page 683.
ā Updated command usage section for the command "ip igmp authentication"
on page 693.
ā Added the commands "clear ipv6 mld snooping groups dynamic" on page 711
and "clear ipv6 mld snooping statistics" on page 712.
ā Updated range for the command "mvr priority" on page 730.
ā Added the commands "clear mrv groups dynamic" on page 739 and "clear mrv
statistics" on page 739.
ā Updated syntax for the command "show mvr members" on page 743 and
"show mvr statistics" on page 745.
ā Added the command "mvr6 priority" on page 751.
ā Added the command "clear efm oam event-log" on page 866.
ā Updated syntax for the commands "ip route" on page 976 and "show ip route"
on page 978.
ā Added BGP to the parameter list for the RIP command "redistribute" on
page 991.
ā Added BGP to the parameter list for the OSPFv2 command "redistribute" on
page 1011.
ā Added the command "area authentication" on page 1014.
ā Added the command "neighbor password" on page 1126.
December 2013 Revision
This is the first version of this guide. This guide is valid for software release v1.1.1.1.
To Next Page
Loading...
