Edge-Core ECS4620-28T

Chapter 27 | OAM Commands
– 869 –
show efm oam
counters interface
This command displays counters for various OAM PDU message types.
Syntax
show efm oam counters interface [interface-list]
interface-list - unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number or list of ports. To enter a list, separate
nonconsecutive port identifiers with a comma and no spaces; use a
hyphen to designate a range of ports. (Range: 1-28/52)
Command Mode
Normal Exec, Privileged Exec
Example
Console#show efm oam counters interface 1/1
Port OAMPDU Type TX RX
---- --------------------- ---------- ----------
1/1 Information 1121 1444
1/1 Event Notification 0 0
1/1 Loopback Control 1 0
1/1 Organization Specific 76 0
Console#
show efm oam
event-log interface
This command displays the OAM event log for the specified port(s) or for all ports
that have logs.
show efm oam event-log interface [interface-list]
interface-list - unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number or list of ports. To enter a list, separate
nonconsecutive port identifiers with a comma and no spaces; use a
hyphen to designate a range of ports. (Range: 1-28/52)
Command Mode
Normal Exec, Privileged Exec
Command Usage
◆ When a link event occurs, no matter whether the location is local or remote, this
information is entered in the OAM event log.
◆ When the log system becomes full, older events are automatically deleted to
make room for new entries.