Edge-Core ECS4620-28T

Chapter 50 | IP Routing Commands
Global Routing Configuration
– 981 –
discards
no routes
generated fragments
fragment succeeded
fragment failed
ICMP Statistics:
ICMP received
input
errors
destination unreachable messages
time exceeded messages
parameter problem message
echo request messages
echo reply messages
redirect messages
timestamp request messages
timestamp reply messages
source quench messages
address mask request messages
address mask reply messages
ICMP sent
output
errors
destination unreachable messages
time exceeded messages
parameter problem message
echo request messages
echo reply messages
redirect messages
timestamp request messages
timestamp reply messages
source quench messages
address mask request messages
address mask reply messages
UDP Statistics:
2 input
no port errors
other errors
output
TCP Statistics:
4698 input
input errors
5867 output
Console#
IPv6 Commands
ipv6 route This command configures static IPv6 routes. Use the no form to remove static
routes.
Syntax
ipv6 route destination-ipv6-address/prefix-length
{gateway-address [distance] | link-local-address%zone-id [distance]}
no ipv6 route destination-ipv6-address/prefix-length
{gateway-address | link-local-address%zone-id}