1
OVERVIEW
Your device can function in four different modes.
AP Mode is a regular access point for use in your wireless network. This is the
default mode of the access point.
Repeater Mode is a wireless repeater (also called wireless range extender)
that takes an existing signal from a wireless router or wireless access point
and rebroadcasts it to create a second network.
Managed AP Mode acts as a “slave” AP within an AP array (controlled by the
AP Controller “master”).
Client Bridge Mode determines the device to be a client bridge. The client
bridge receives wireless signal and provides it to devices connected to the
bridge via Ethernet cable.
To Next Page
Loading...
