61
IV-3-2-2 Advanced
These settings are for experienced users only. Please do not change any of the
values on this page unless you are already familiar with these functions.
Changing these settings can adversely affect the performance of your
access point.
Set the guard interval. A shorter interval can improve
performance.
Enable/disable 802.11n protection, which increases reliability
but reduces bandwidth (clients will send Request to Send
(RTS) to access point, and access point will broadcast Clear to
Send (CTS), before a packet is sent from client.)
Set the DTIM (delivery traffic indication message) period value
of the wireless radio. The default value is 1.
Set the RTS threshold of the wireless radio. The default value
is 2347.
Set the fragment threshold of the wireless radio. The default
value is 2346.
Set the transfer rate for multicast packets or use the “Auto”
setting.
To Next Page
Loading...
