Edimax OAP1300 User Manual

86
IV-4 Management
(Configurable for AP Mode only)
IV-4-1 Admin
You can change the password used to login to the browser-based
configuration interface here. It is advised to do so for security purposes.
If you change the administrator password, please make a note of the
new password. In the event that you forget this password and are
unable to login to the browser based configuration interface, see I-5
Reset for how to reset the access point.
Account to Manage This Device
Administrator
Name
Set the access point’s administrator name. This is used to log
in to the browser based configuration interface and must be
between 4-16 alphanumeric characters (case sensitive).
Administrator
Password
Set the access point’s administrator password. This is used to
log in to the browser based configuration interface and must
be between 4-32 alphanumeric characters (case sensitive).
Press “Apply” to apply the configuration.

Edimax OAP1300 Specifications

General

Brand	Edimax
Model	OAP1300
Category	Wireless Access Point
Language	English