Introduction
EST3 System Operation Manual 1.3
Table 1-1: Password privileges
Password Level Privileges
User access level 1 All default privileges, plus:
• Sensitivity reports
• Guard patrol routes
(activate/restore)
• Check-in groups (activate/restore)
User access level 2 All default and User 1 privileges, plus:
• History reports
• Devices (enable/disable)
• Zone groups (enable/disable)
• Alternate sensitivity (activate)
• Alternate message route (activate)
• Primary sensitivity (restore)
• Primary message route (restore)
• Change time (program)
• Change date (program)
• Security devices (bypass/unbypass)
• Partitions (arm/disarm)
• Change password for level 1
User access level 3 All default, User 1 and 2 privileges,
plus:
• AND group (enable/disable)
• Check-in group (enable/disable)
• Matrix group (enable/disable)
• Service group (enable/disable)
• Guard patrol group (enable/disable)
• Instruction text (enable/disable)
• Time control (enable/disable)
• Switch (enable/disable)
• LED (enable/disable)
• Relay (activate/restore)
• LED (activate/restore)
• Audio amp (activate/restore)
• Audio message (activate/restore)
• Holiday list (program)
• Change password for level 2
Service access level 4 All default, User 1, 2, and 3 privileges,
plus:
• Security functions: NONE
• Output: Primary printer select
• Card (LRM)(enable/disable)
• Restart by panel (program)
• Restart all panels (program)
• Clear history (program)
• Test (start/cancel)
• Change password for level 3
To Next Page
Loading...
