3-LCD operating instructions
2.30 EST3 System Operation Manual
Scheduling holidays
Holidays vary from installation to installation and may change
from year to year. By scheduling holidays, a panel can activate a
time-controlled event based on whether the day is a scheduled
holiday.
Note: Each panel can store up to 255 holidays.
To schedule a holiday:
1. Press the Command Menus button , then choose Program.
2. Choose Edit Holiday List.
3. Choose Add Holiday.
4. Enter the holiday’s month and date (MMDD).
5. If prompted, enter a valid user access level password.
To delete a holiday from the list:
1. Press the Command Menus button , then choose Program.
2. Choose Edit Holiday List.
3. Select Delete Holiday.
4. Select the holiday from the list.
5. If prompted, enter a valid user access level password.
To change a holiday:
1. Press the Command Menus button , then choose Program.
2. Choose Edit Holiday List.
3. Choose Edit Holiday.
4. Select a holiday from the list.
5. Enter the new month and date (MMDD).
6. If prompted, enter a valid user access level password.
To Next Page
Loading...
