3-LCD operating instructions
EST3 System Operation Manual 2.27
Setting the system time and date
Set the system time and date to configure the panel’s time of day
and date reference. Set the system time and date when the panel
is first placed in service.
The system time of day is set in 24-hour format (HHMMSS),
where: HH is the hour, MM is the minutes, and SS is the
seconds.
For example:
Enter this value
(HHMMSS) To set this time
000000 12 midnight
010000 1 a.m.
115900 11:59 a.m.
120000 12 noon
130000 1 p.m.
235930 11:59:30 p.m.
To set the system time of day reference:
1. Press the Command Menus button , then choose Program.
2. Choose Change Time.
3. Enter the time in 24-hour format (HHMMSS)
4. If prompted, enter a valid user access level password.
The system date is set in a month/date/year format
(MMDDYYYY), where: MM is the month number, DD is the
date, and YYYY is the year. For example, to set the date for
January 1, 1999, enter 01011999.
To change the system date reference:
1. Press the Command Menus button , then choose Program.
2. Choose Change Date.
3. Enter the date (MMDDYYYY).
4. If prompted, enter a valid user access level password.
To Next Page
Loading...
