3-LCD operating instructions
EST3 System Operation Manual 2.15
Disarming security partitions
A security partition is a group of devices intended to secure a
physical area. When you disarm a partition, you instruct the
system to stop monitoring those devices for armed alarm events.
When a partition is disarmed the system generates disarmed
alarm events, except for 24Hour security devices which always
generate armed alarm events.
When you choose the disarm command, the system checks all
the devices in the partition to ensure that they’re in a normal
state. If a device is in an off-normal condition while the partition
is armed, the panel will restore the armed event and activate the
disarmed event.
After you choose the disarm command, the system displays a list
of partitions. You scroll through this list and select the partition
you wish to disarm.
Note: Security commands are optional. Project configuration
settings determine whether security commands appear on the
panel menus.
To disarm a security partition:
1. Press the Command Menus button , then choose Security.
2. Choose Partition.
3. Choose Partition Disarm.
4. Scroll through the Partition List and choose the partition you
want to disarm.
5. If prompted, enter a valid user access level password.
To Next Page
Loading...
