3-LCD operating instructions
2.14 EST3 System Operation Manual
After choosing to arm the partition, the system displays a list of
partitions. Scroll through this list and select the partition you
wish to arm.
Note: 3-LCD security commands are optional. Cabinet
configuration settings determine whether security commands
appear on the panel menus.
To arm a security partition:
1. Press the Command Menus button , then choose Security.
2. Choose Partition.
3. Choose the type of arming you want: Partition Away or
Partition Stay.
4. Scroll through the Partition List and choose the partition you
want to arm.
5. If prompted, enter a valid user access level password.
To Next Page
Loading...
