3-LCD operating instructions
EST3 System Operation Manual 2.23
Changing event message routing
Each device in the system is configured with a primary and
alternate message routing. When a device in the system changes
state, the panel connected to the device produces an event. The
panel distributes the event according to the active message
routing setting that is active at the time.
Activating event alternate message routing
Activating the alternate event message routing directs the panel
to use the alternate routing destinations for any device that
changes state.
To activate event alternate message routing:
1. Press the Command Menus button , then choose Activate.
2. Choose Alt Message Route
3. If prompted, enter a valid user access level password.
Restoring event primary message routing
Restoring the primary message directs the panel to use the
primary routing destinations for any device that changes state.
To restore event primary message routing:
1. Press the Command Menus button , then choose Restore.
2. Choose Primary Msg Route
3. If prompted, enter a valid user access level password.
To Next Page
Loading...
