CE Declaration of Conformity
The following product
w = 0, 1 (cooling system)
x = 934, 936, 945, 946, 957 (motor variants)
ATEX Marking:
II 3/-G Ex h IIC T3 Gc
5°C ≤ Ta ≤ 40°C
(internal atmospheres only)
Is in conformity with the relevant requirements of European CE legislation:
ATEX directive on use in potentially explosive atmospheres
Electromagnetic compatibility (EMC) directive
Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
Safety of machinery - Electrical equipment of machines Part1: General requirements
Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres.
Basic method and requirements
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres --
Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'',
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments
EN 61000-6-4:2007
+A1:2011
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for
industrial environments
Jelena Havelkova, Spielberk Office Centre, Holandska 10, Brno, 63900 Czech Republic,
: documentation@edwardsvacuum.com
This declaration, based on the requirements of the listed Directives and EN ISO/IEC 17050-1, covers all product
serial numbers from this date on: 20
th
January 2020.
Andries De Bock – Vice President Engineering
Industrial Vacuum Division
Axel Guddas – General Manager
Cologne
Innovation Drive
Burgess Hill
West Sussex
To Next Page
Loading...
