Edwards ES Series

A352-02-840 Issue A
Page 10 © Edwards Limited 2014. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
EH - ES frame mount assembly procedure
5 EH - ES frame mount assembly
procedure
See Table 10 for the required tools for performing this procedure.
Table 10 - Required tools
Tool description Quantity
½ inch torque wrench 2
13 mm spanner (for M8 on claws) 1
24 mm spanner (for M16) 1
24 mm socket (for M16) 2
18 mm socket (for M12) 2
19 mm spanner (for M12) 1
17 mm socket (for M10) 2
13 mm spanner (for M8 on claws) 1
30 mm spanner (for M20 bolt) 1