9. Storage
WARNING: INHALATION HAZARD
Risk of asph
yxiaon. Do not burn the uoroelastomer seals and O-rings.
CAUTION: LUBRICATION TRANSFER
Risk of damag
e to equipment. Install blanking plates to seal the vacuum inlet and
outlet port. The pumps must be stored in a horizontal conguraon to prevent
possible lubricaon transfer.
To store the pump:
1. Shut down the pump. Refer to Shut down the pump on page 35.
2. Disconnect the pump from the electrical supply.
3. Place and secure protecve covers over the inlet and outlet ports.
4. Store the pump in a clean and dry condion unl required for use.
5. When necessary, prepare and install the pump. Refer to Installaon on page 19.
05/2021 - ©Edwards Limited
Page 45A90301880_C
A90301880_C - Storage
To Next Page
Loading...
