This product has been manufactured under a quality management system certified to ISO 9001:2015
Declaration of Conformity
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK
Documentation Officer
documentation@edwardsvacuum.com
This declaration of conformity is issued under the sole responsibility of the manufacturer.
nXR30i 100-127/200-240V 1ph 50/60 Hz NW25 Inlet
nXR40i 100-127/200-240V 1ph 50/60 Hz NW25 Inlet
nXR60i 100-127/200-240V 1ph 50/60 Hz NW40 Inlet
nXR90i 100-127/200-240V 1ph 50/60 Hz NW40 Inlet
nXR120i 100-127/200-240V 1ph 50/60 Hz NW40 Inlet
The object of the declaration described above is in conformity with relevant statutory requirements:
Supply of Machinery (Safety) Regulations 2008
The objectives of the Electrical Equipment (Safety) Regulations 2016 are governed by Annex 1 1.5.1 of this regulation.
Electromagnetic Compatibility Regulations 2016
Class B Emissions, Industrial Immunity
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2012
Relevant designated standards or technical specifications are as follows:
Safety of machinery. General principles for design. Risk assessment and risk
reduction
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
Safety requirements for electrical equipment for measurement, control and
laboratory use. General requirements
Electrical equipment for measurement, control and laboratory use. EMC
requirements. General requirements
This declaration, based on the requirements of the listed Statutory Instruments and EN ISO/IEC 17050-1,
covers all product serial numbers from this date on: 2021-05-13
You must retain the signed legal declaration for future reference
This declaration becomes invalid if modifications are made to the product without prior agreement.
Signed for and on behalf of Edwards Ltd
– Engineering Manager
Scientific Vacuum Division, Lutin
– General Manager