42
Fail screens will appear as follows:
Touch the screen to select the desired value and the enter key (↵) to save the selection and move
to the next parameter.
4.3.4.2 Touch Sound
Select Touch Sound icon on and choose between ON and OFF. If Touch Sounds = ON, the
instrument will emit a short audible beep anytime the screen is touched.
4.3.4.3 Alarm Volume
Select Alarm Volume using the touchscreen and use the numeric keypad to enter a value. The
numbers corresponding to the different volume settings are 0 through 9, 0 meaning the volume is
off, and 9 being the loudest setting.
Upon selecting a value, a momentary alarm chirp will occur to indicate the volume of the new
setting, and the enter key (↵) will appear. Touch the enter key to save the value and move to the
next field.
4.3.4.4 Language
Select Language from the touchscreen and choose the desired language. The available languages
on the SE instrument are English, Chinese, Simplified Chinese and Japanese.
4.3.4.5 Animation
Select Animation using the touchscreen display and select between CONTINUE or PAUSE. If PAUSE is selected, the
instrument will stop on the animation screen during power up. The user must touch the screen to continue to the
Main Menu. If CONTINUE is selected, the instrument will automatically navigate to the Main Menu after the animation
screen.
4.3.4.6 Home Screen
This allows the user to set the default screen upon instrument power up. Select Home Screen on
the touchscreen display and choose between Perform Test, Menu or My Menu.
If Perform Test is selected, the instrument will automatically navigate to the Perform Tests screen
upon power up. If Menu is selected, the instrument will automatically navigate to the Main Menu
upon power up. If My Menu is selected, the instrument will automatically navigate to the user’s
My Menu setup upon power up.
To Next Page
Loading...
