EEC SE 7441 - 9.3 Calibration of Parameters

88
COMMAND
NAME
VALUE
Name: 8 character max
Password: 8 number max
Level: 0=Run Only,
1=Recall Setup,
2=Edit Step,
3=Full System
SUD n
User Delete
n=1-5
SUE p,p,p,p
User Edit
SUA Pointer,Name,Password,Level
Pointer: 1-5
Name: 8 character max
Password: 8 number max
Level: 0=Run Only,
1=Recall Setup,
2=Edit Step,
3=Full System
SM n
SM?
Measurement
n=0-1
0=True RMS, 1=Average
SBI n
SBI?
Barcode IP Format
n=0-6
0=Off, 1=PRO CHEK/SER,
2=PROD/SER, 3=PRODUCT,
4=SERIAL, 5=PROD/SER1/SER2,
6=PROD one/SER
SAS n
SAS?
Auto Start Format
n=0-1
0=Off, 1=On
8.4.6 Query Commands
These query commands will retrieve data from the instrument. The GPIB bus application requires
an IEEE-488 read command to be sent after the query command. These commands include
functions for retrieving test data, test results and remote hardware status as well as setup file
information.
COMMAND
NAME
VALUE
TD?
List Testing Data
Test In Process
RDM?
Read Max Current
ACW: Total current, Real
Current DCW: current
RD <step
number>?
List Results Data
step number = 1-200
RR?
Read Remote Reset
1=Open, 0=Closed
RI?
Read Remote Interlock
1=Open, 0=Closed