What to do if I get a login password error on my Efficient Networks SpeedStream 5100 Network Router?
If you encounter a login password error with your Efficient Networks Network Router, first, carefully retype the password and click 'Save Settings'. If you've forgotten your password, you'll need to reset the router to regain access.
How to fix the power LED if it's not lit on my Efficient Networks SpeedStream 5100?
If the power LED (pwr) is not lit on your Efficient Networks Network Router, check that the power cord is securely plugged into the back of the router and into a working AC wall outlet or power strip.
What to do if the DSL LED is not lit on my Efficient Networks SpeedStream 5100?
If the DSL LED is not lit on your Efficient Networks Network Router, ensure the DSL cable is connected to the correct port on the router and that the power cord is plugged into the electrical outlet. If the cables are secure, you should contact your Service Provider.
Why is the enet LED not lit on my Efficient Networks SpeedStream 5100?
If the enet LED is not lit on your Efficient Networks Network Router, verify the Ethernet cable connection between your computer and the router. A lit LED on your computer's Ethernet (NIC) card confirms the correct cable usage.
General| Standards | ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite) |
|---|---|
| Interface | Ethernet |
| WAN Ports | 1 |
| Maximum Data Rate | 8 Mbps downstream, 1 Mbps upstream |
| Operating System Support | Windows, Macintosh, Linux |
Explains the router's firewall features and protection levels.
Lists essential safety precautions for using the router.
Lists prerequisites for installing and operating the router.
Explains how to access and exit the router's web management interface.
Details how to open the router's configuration portal.
Guides users through the initial login and setup process.
Describes how to set or enter the router's administrative password.
Explains subsequent login procedures after initial setup.
Covers configuration of Wide Area Network settings.
Details Dynamic Host Configuration Protocol settings.
Describes changing admin username and password.
Explains Network Address Translation configurations.
Details configuring port forwarding rules.
Overview of firewall settings and protection.
Details creating custom IP filtering rules.
Details the Attack Detection System.
Explains PPP configuration for WAN connections.
Details various settings for PPP connections.
Guides on modifying existing PPP connection parameters.
Covers creating and managing user profiles for access control.
Details selecting filtering levels and criteria.
Explains configuring login security for configuration changes.
Guides on configuring Wide Area Network settings.
Explains how to activate a WAN connection.
Guides on creating new virtual WAN connections.
Explains choosing the protocol for the WAN connection.
Details setting up RFC-2684 Bridged protocol.
Details setting up RFC-2684 Bridged/IP protocol.
Details Network Address Translation configurations.
Details setting up PPPoE protocol.
Details setting up PPPoA protocol.
Covers selecting interface settings like firewall and NAT.
Displays an overview of router status and connections.
Provides tools for testing DSL service and connections.
Guides on restoring factory default settings.
Details the process of updating the router's firmware.
Explains downloading and installing firmware updates.
Outlines general steps to resolve connection issues.
Explains the meaning of router LED indicators.
Addresses common problems and their solutions.
Guides on resolving login password issues.
To Next Page