SpeedStream Router User Guide
11
Windows NT 4.0
1. On the Windows taskbar, click Start, then
point to Settings, and then click Control
Panel.
The Windows Control Panel displays.
2. In Control Panel, double-click Network.
The Network dialog box displays.
3. On the Protocols tab, select TCP/IP
Protocol, and then click Properties.
The Microsoft TCP/IP Properties dialog
box displays.
4. In the Microsoft TCP/IP Properties
dialog box, make sure that the correct
network adapter is selected in the Adapter
menu and that Obtain an IP address from
a DHCP server is selected; then click OK.
Note Your network adapter may differ
from this illustration.
To Next Page
Loading...