SpeedStream Router User Guide
Appendix A:
Configuration Data Sheets
Your router is preconfigured with settings specific to your network. We strongly suggest that you record
these settings in case you need to reestablish your original configuration.
Administrative User Setup
Parameter Default Value Your Value
User Name admin
Password
Attack Detection System
Parameter Default Value Your Value
Enable ADS
Same Source/Destination Address Filter: Log: Filter: Log:
Broadcast Source Address Filter: Log: Filter: Log:
LAN Source Address On WAN Filter: Log: Filter: Log:
Invalid IP Packet Fragment Filter: Log: Filter: Log:
TCP NULL Filter: Log: Filter: Log:
TCP FIN Filter: Log: Filter: Log:
TCP Xmas Filter: Log: Filter: Log:
Fragmented TCP Packet Filter: Log: Filter: Log:
Fragmented TCP Header Filter: Log: Filter: Log:
Fragmented UDP Header Filter: Log: Filter: Log:
Fragmented ICMP Header Filter: Log: Filter: Log:
DHCP
Parameter Default Value Your Value
DHCP Server
Start IP Range
End IP Range
IP Netmask
Default Gateway
Or Self
DNS Server
Or Use Wan
Domain Name
Lease Time (Mins)
Or Infinite Time
Firewall – Custom IP Filter Configuration
Parameter Default Value Your Value
Rule #
Status
Access
93
To Next Page
Loading...
Need help?
General