INTRODUCTION 7
INTRODUCTION
This document describes how to set up network servers and user computers to use the EX700i
Print Server/Integrated Fiery Color Server so that users can print to it as a high-performance
networked printer. For general information about using the digital press, your computer,
software, or network, see the documentation that accompanies those products.
Setting up the network environment correctly requires the presence and active cooperation of
the network administrator. Detailed instructions for configuring networks is beyond the
scope of this document. For information, see the documentation that accompanies your
network.
For information about supported operating systems and system requirements, see Welcome.
This document covers the following topics:
• Network connectors on the EX700i Print Server/Integrated Fiery Color Server
• Information specific to the EX700i Print Server/Integrated Fiery Color Server about
setting up network servers
NOTE: For more information about network servers, see the documentation that accompanies
your network.
• System security through access levels and passwords
• Setup of the EX700i Print Server/Integrated Fiery Color Server from the digital press
touch panel
• Setup of the EX700i Print Server/Integrated Fiery Color Server from a network computer
• Setup of the EX700i Print Server/Integrated Fiery Color Server to allow users to use
WebTools
• Administration of the EX700i Print Server/Integrated Fiery Color Server
• Troubleshooting
Administrator functions described in other documentation are summarized on page 38.
To Next Page
Loading...
Need help?
General
