PREPARING FOR EX700I SETUP 15
PREPARING FOR EX700I SETUP
To prepare for printing at your site, you must do some initial EX700i configuration (or
“Setup”) to specify the network environment and the types of printing you do. Before you
perform Setup, decide the levels of access to implement, such as passwords and other security
features that the EX700i offers. Because many of these security features are interconnected,
review the information in this chapter to plan for an effective security system, and then
perform Setup accordingly.
Levels of access and control
When you configure the EX700i during Setup, you implement a particular level of control by
configuring these elements:
• Users and Groups
• Print connections
• Access to WebTools
Users and Groups
With Configure, you create users, assign passwords to users, create groups with particular
privileges, and assign users to the groups. Several groups are provided by default, and you can
create new groups. All users in a group have the same privileges.
In addition to assigning the users that you create to a group, you can add users from your
organization’s global address list if LDAP services is enabled on the EX700i.
The following discussion is an overview designed to help you prepare a security strategy.
For more information, including specific procedures, see Configure Help.
To Next Page
Loading...
Need help?
General
