To Next Page

To Previous Page

CONFIGURING WEBTOOLS 37

CONFIGURING WEBTOOLS

WebTools allow you to manage your EX700i remotely from the Internet or your company’s

intranet. The EX700i has its own home page, from which you can select the WebTool that

you want to use.

For information about using WebTools, see Utilities. Also, for many of the WebTools, you can

consult Help.

Configuring the EX700i and computers for WebTools

WebTools provide access to many EX700i functions via the Internet (or intranet), providing

additional flexibility in remote management. With WebTools enabled, you can access them

from a network computer.

WebTools is enabled by default.

TO ENABLE ACCESS TO WEBTOOLS, ENSURE THAT THE FOLLOWING ITEMS ARE ENABLED

• A valid, unique IP address, subnet mask, and gateway address for the EX700i.

Print a Configuration page to acquire the EX700i IP address (see page 55).

• Web Services is enabled by default.

TO SET UP A COMPUTER TO ACCESS WEBTOOLS

1 Enable TCP/IP networking on the user computer.

2 Assign the computer a valid, unique IP address, subnet mask, and gateway address,

if required.

3 Install an Internet browser that supports the Java language and frames.

Make sure that Java is enabled. For more information about supported browsers and

WebTools requirements, see Welcome.

TO ACCESS WEBTOOLS

1 Start your Internet browser and type the IP address or DNS name of the EX700i.

The EX700i home page appears.

2 Click the tab corresponding to the WebTool that you want to use.

Questions and Answers:

Need help?

Do you have a question about the EFI Fiery EX700i and is the answer not in the manual?

EFI Fiery EX700i Specifications

General