SETUP OPTION REFERENCE 34
SETUP OPTION REFERENCE
This chapter describes the default settings that you can set for the following types of options:
• PS (PostScript) and PCL
For more information about print options, see Printing.
For Setup options not listed this section, see Configure Help.
To determine the current Setup defaults, print the Server Configuration page from Command
WorkStation.
PS and PCL Setup options
• To access PS Setup options, choose Configure > PDL > PS.
• To access PCL Setup options, choose Configure > PDL > PCL.
Option Settings
(default is underlined)
Description
Allow Courier Substitution Yes
, No Specify whether to substitute Courier for fonts that are unavailable
when you download files to the EX700i, or when you print a
document for which you do not have the corresponding printer font.
If this option is set to No, jobs with fonts that are unavailable on the
EX700i hard disk generate a PostScript error and do not print. This
setting does not apply to PDF files; font substitution occurs
automatically in PDF files.
Append CR to LF Yes
, No Specify whether to append a carriage return to each line feed.
Cache PDF and PS objects On, Off
Specify whether images in PDF and PS files are cached to reduce the
need to reprocess the same image in a file.
Convert Paper Sizes No
, Letter/Tabloid->A4/A3,
A4/A3->Letter/Tabloid
Converts paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/Tabloid->A4/A3, a
letter size document is automatically printed on A4 paper.
This option works in conjunction with the Default Paper Sizes option.
For example, if Convert Paper Sizes is set to Letter/Tabloid->A4/A3,
and Default Paper Sizes is set to US, jobs are printed A4/A3 size. This
also includes EX700i system pages such as the Start Page, Test Page,
and Job Log.
To Next Page
Loading...
Need help?
General
